I can't open any dxf files. (Even sample dxf from source code files.) The app tries to process the files yet never draws a figure.
Installed with apt-get install dxf2gcode. Tried unsuccessfully to do command line install with GitHub - ltspicer/dxf2gcode.linux.installer: Installer script for Linux users (Debian based -- Debian, Ubuntu, Linux Mint, etc.). Tested on Linux Mint MATE, Debian GNOME & Lubuntu (LXDE)
kubuntu 20.04.4 LTS
Python 3.8.10
The following warnings are shown when run from the command line
Installed with apt-get install dxf2gcode. Tried unsuccessfully to do command line install with GitHub - ltspicer/dxf2gcode.linux.installer: Installer script for Linux users (Debian based -- Debian, Ubuntu, Linux Mint, etc.). Tested on Linux Mint MATE, Debian GNOME & Lubuntu (LXDE)
kubuntu 20.04.4 LTS
Python 3.8.10
The following warnings are shown when run from the command line
desktop:~$ dxf2gcode
Creating configuration window
Creating configuration window
File: /home/hps/Downloads/dxf2gcode/1997_simplified_doppelte_linien.dxf selected
Loading file: /home/hps/Downloads/dxf2gcode/1997_simplified_doppelte_linien.dxf
Reading DXF Structure
Creating Contours of Entities
Loaded layers: 1
Loaded blocks: 0
Loaded 908 entity geometries; reduced to 12 contours; used layers: [0]; number of inserts 0
Drawing units: millimeters
Traceback (most recent call last):
File "/usr/lib/python3/dist-packages/dxf2gcode/core/shape.py", line 609, in abs_iter
raise StopIteration()
StopIteration
The above exception was the direct cause of the following exception:
Traceback (most recent call last):
File "/usr/bin/dxf2gcode", line 727, in open
self.load()
File "/usr/bin/dxf2gcode", line 874, in load
self.makeShapes()
File "/usr/bin/dxf2gcode", line 922, in makeShapes
self.makeEntityShapes(self.entityRoot)
File "/usr/bin/dxf2gcode", line 996, in makeEntityShapes
tmp_shape.AnalyseAndOptimize()
File "/usr/lib/python3/dist-packages/dxf2gcode/core/shape.py", line 175, in AnalyseAndOptimize
self.setNearestStPoint(Point())
File "/usr/lib/python3/dist-packages/dxf2gcode/core/shape.py", line 190, in setNearestStPoint
min_geo_nr, _ = min(enumerate(self.geos.abs_iter()),
RuntimeError: generator raised StopIteration