gelöst DC-DC Wandler 24V/350V/1150 Watt - meine erste Simulation mit LTspiceXVII

Problem gelöst !!!!!!! Simulationszeit jetzt 10 min. statt 3 Stunden! Das Problem lag am IR2110 Model von H. Sennewald.
Ein Spezialist aus USA hat mir weitergeholfen. Siehe unten. Files siehe Anhang
andrewmosqueda
04:57 (vor 5 Stunden)
an mich


Hello,

It seems that the IR2110 model is causing a lot of convergence problems. Perhaps it was only verified and optimized by the developer in the PSPICE software. Replacing it with a simple model solves the problem. But since we want to use some real world model, we can use the datasheet based model at LTspice simulation of H-bridge using IR2110.
I have modified the IR2110 which I have downloaded from that thread to be compatible with your circuit and attached here the working files. Good luck.

I have also seen from other threads to use the IR2110A model from the same manufacturer. You may also want to try it.
 

Anhänge

Benutzer, die diesen Thread gerade lesen

Wer hat diesen Thread gelesen

Zurück
Oben