P
paulsao
Gast
Hello, I would like to know how I can modify the postprocessor to use it in a plasma machine with linuxcnc.
Folge dem Video um zu sehen, wie unsere Website als Web-App auf dem Startbildschirm installiert werden kann.
Anmerkung: Diese Funktion ist in einigen Browsern möglicherweise nicht verfügbar.
Hi, you can open a topic in our new forum, check here:
ltspiceusers.ch
But i know that i just discussed this with someone else in the old section. Check here first:
Missing lines in output for Laser engraver
However if there are additional questions, just open one in the new forum we don't want to continue with google groups, as they are not that easy to search etc.
regards
Christian
So you need to change the way how arc's are cut. Therefore the following two lines.1) In plasma cutting to cut circles it is necessary to reduce the speed to 50 or 60% of the cutting speed, I am achieving this manually by adding a g code before and after a circle shape, but I would like it to be the processor automatically identifies the circles and adds that part of code to slow down.
2) I would like to know how I can modify the way the torch enters when making a cut, for example at a right angle or an entry at an angle.
I imagined it, that's the only thing I would need to change in the code.The entry move is only there when using the machine compensation.